Information on the "SuperClimbHill rear hub" product
Derived from our classic ClimbHill hub, the SuperClimbHill is designed for superboost bikes, ideal for the toughest trails. The hub features Endurance bearings and a pedal-kick-back resistant freewheel body. Among other features, light weight and durability are the hallmarks of our aerospace-grade aluminum construction, with increased fatigue resistance - ideal as the basis for a lightweight yet stiff wheelset. The hub is available in all Tune colors and is machined and assembled by hand in our factory in Germany. The anodizing ensures a great look and prevents corrosion, even under the most extreme conditions.
Technical data
Weight from: 232g
Recommended spokes: SAPIM CX-Ray, SAPIM D-Light
Maximum spoke tension 1100N
maximum user weight: 105kg
maximum system weight: 120kg
Usage: MTB
Dimensions 12X157mm
Right flange distance: 41,3mm
Right flange distance: 28,1mm
diameter of the circle of holes on the left: 55,5mm
diameter of the circle of holes on the right: 55,5mm
diameter of spoke holes: 2,4mm
Spoke lacing pattern: 32 spokes with 3-way cross lacing Our tune spokelength-calculator will further help you to calculate the needed spoke lengths!
Configurations:
Endurance bearing with Endurance freewheel body
scope of delivery: hub and corresponding packaging
Notice:
Remove the 1.8mm spacer on your freewheel to change from HG10 to HG11 and from XD to XDR.
Remove the two spacers (1.8mm and 0.6mm) on your freewheel to change from HG10 to HG12.
Thread brake residue must be removed before installation. The brake disc must be fixed with a torque wrench calibrated to a maximum torque of 5 Nm.
for more information please refer to the user manual
*XD-Compatible licensed by SRAM
*microspline system licensed by Shimano
